| REFERENCE
SOURCE INPUT OPTIONS GPS L1 Ant. input : 1575.42MHz GPS Timing Ant. Input : 1PPS Quartz Oscillator : 10MHz |
||
| OUTPUTS ABAILABLE ¢º 1PPS TTL into 50ohms, rising edge on time. Pulse width user selectable Frequency : 1Hz Signal Type : TTL Accuracy : ¡Â¡¾100ns referenced to GPS ¡Â¡¾7us (Coasting) Jitter : ¡Â200ns |
¢º PP2S(Even
seconds)
|
|
| ¢º Output Frequencies(Locked
to 10MHz) 19.6608MHz 29.4912MHz 30.72mhz 39.3216MHz 61.44MHz 9.8304MHz 2.048MHz(E1) 1.544MHz(T1) 8kHz Other Frequency Available Accuracy : Same as 10 MHz Analog 1x10-11(one day average) Locked to GPS 1x10-10(one day average) Coasting Signal type : LVTTL, PECL, LVDS, etc. Duty Cycle : 50% |
¢º 10MHz Analog Accuracy : 1x10-11(one day average)Locked to GPS 1x10-10(one day average)Coasting Short term stability : 1x10-11(Root allen variance, 100second average) Signal type : Analog sinusoid Amplitude : 13¡¾2 dBm Harmonics : <-30dBc Phase Noise 1Hz ------------------90dBc/Hz 10Hz ----------------115dBc/Hz 100Hz ----------------120dBc/Hz 1KHz ----------------145dBc/Hz 10KHz ----------------145dBc/Hz 100KHz ----------------145dBc/Hz |
|
| ¢º Time of Date Signal Level : RS-232C Data rate : 9600bps Protocol : 1Start Bit, 8Data Bits, 1Stop Bit, Bo Parity |
¢º Environmental Specifications Operating Temperature : 0¡É to 50¡É Stotage Temperature : -40¡É to 85¡É Humidity : 5% to 95% |
|
| ¢º Time Codes Default is IRIG-B120, Other available |
¢º Input Power Voltage : 20 to 53Vdc(Others available) |
|
| ¢º Display &
Keypad(Optional) Time into the second, updated once per second, is displayed to the nanosecond until another event occurs or until the ¡°Time¡±, ¡±Status¡±,or ¡°Position ¡° push-button is pressed, The monitored frequency and time deviation values are available via the front panel display, as well as control port Display : LED, LCE, VFD, Other available Keypad : Membrane Keypad, Other available |
¢º Interface Specifications
|
|
Other
products > products |